Please use the form below to provide your feedback. Because your feedback is valuable to us, the information you submit in this form is recorded in our issue tracking system (JIRA), which is publicly available. You can track the status of your feedback using the ticket number displayed in the dialog once you submit the form.

A newer version of this documentation is available.

View Latest

Setting a Reference

      +
      The REST API can be used to create an XDCR reference to a destination cluster.

      Description

      On the cluster that is intended to be a source for XDCR, a reference to an intended target cluster must first be defined. The target cluster is typically a different cluster from the source cluster; but may be the same cluster.

      A source cluster’s references can be defined by means of the REST API.

      The Full Admin, Cluster Admin, or XDCR Admin role is required.

      HTTP method and URI

      POST /pools/default/remoteClusters

POST /pools/default/remoteClusters/<target-cluster-local-name>

      Curl Syntax

      curl -v -u <source-cluster-username>:<source-cluster-password>
  http://<source-cluster-ip-address-or-domain-name>]:8091/pools/default/remoteClusters/[<target-cluster-local-name>]
  -d name=<target-cluster-local-name>
  -d hostname=<target-cluster-ip-address-or-domain-name][:<port-number>]
  [-d network_type='external']
  [-d username=<target-cluster-username>]
  [-d password=<target-cluster-password>]
  [-d demandEncryption=[ 0 | 1 ] ]
  [-d secureType=[ 'none' | 'half' | 'full'] ]
    [--data-urlencode "certificate=$(cat <local-pathname-to-target-root-certificate>)"]
    [--data-urlencode "clientCertificate=$(cat /Users/username/clientcert/travel-sample.pem)"]
    [--data-urlencode "clientKey=$(cat /Users/username/clientcert/travel-sample.key)"]

      The value of the name parameter (target-cluster-local-name) is for local reference only, and so need not correspond to any network-visible name established for the target cluster. If an existing reference is being edited, the existing value of name should be specified as a path-parameter that terminates the endpoint: in such cases, the name flag itself must still be included in the the payload, specifying either the existing or a new value.

      The value of the hostname parameter (target-cluster-ip-address-or-domain-name) determines the target cluster to which the connection will be made. This value can specify either the internal or (if one has been configured) the external address of the target cluster. For information on using DNS SRV in this context, see XDCR Security and Networking.

      The value of the optional network_type parameter must be external. If this is specified, and an external network has been configured for the target cluster, use of the target cluster’s external address is attempted. If no external network has been configured, and the hostname refers to a valid internal address for the cluster, the internal address is used.

      The values specified for the optional username and password parameters must be the username and password for the target cluster, respectively. These values must be established if none or half is the value of the secureType parameter. These values must also be established if full is the value of the secureType parameter, and authentication with client certificates is not being attempted. However, if full is the value of secureType, and authentication with client certificates is being attempted, these values must not be established.

      The optional secureType parameter can be none (which is the default), half, or full; and thus specifies the type of security to be used for the connection. If the optional demandEncryption parameter is specified with a value of 1, a secure connection is enforced: in such a case, if secureType is specified as half or full, the security of the connection is established according to the value of secureType; whereas if secureType is not specified, the security of the connection is established as full. The default value of demandEncryption is 0.

      If secureType is full, the local pathname of the target cluster’s root certificate must be specified, as the value of the --data-urlencode flag. Note that this additionally requires either that values be established for the username and password parameters; or that no values be established for the username and password parameters, and instead, local pathnames to a client certificate and corresponding client private key be established. Each certificate or key must be specified as the value of a separate data-urlencode flag.

      If secureType is half, and the target cluster is running a pre-5.5 version of Couchbase Server, the local pathname of the target cluster’s root certificate must be specified, as the value of the --data-urlencode flag. However, if the target cluster is running 5.5 or later, the pathname need not be specified.

      Responses

      Successful execution returns 200 OK, establishes the reference, and returns an object whose key-value pairs provide details of the reference. The keys are as follows:

      • certificate. The root certificate for the target cluster, if one was used, in the creation of a half secure or full secure connection.

      • clientCertificate. The client certificate for the source cluster, if one was used, in the creation of a full secure connection.

      • deleted. Whether the reference has been deleted. The value can be one of the booleans true and false.

      • hostname. A string that contains the IP address (or domain name) and port number of the target cluster.

      • name. A string that is the locally defined reference to the target cluster.

      • secureType. A string that specifies the level of security required for connection. This can be none, half, or full.

      • uri. A string that is the URI of the locally named target cluster. For example, "/pools/default/remoteClusters/FirstTarget".

      • username. A string that is the name of the current user.

      • uuid. A string that is the universally unique identifier for the reference. For example, "5ccf771844cd32375df8c4de70e9d44e".

      • validateURI. A string that is the URI for internal validation of the reference. For example, "/pools/default/remoteClusters/SecondTarget?just_validate=1".

      Failure to authenticate returns 401 Unauthorized. An incorrectly specified URI returns 404 Object Not Found. If secureType is full, and credentials and client certificates are specified, connection fails with 400 Bad Request, and an error message such as {"_":"username and client certificate cannot both be given when secure type is full"}.

      Examples

      The following examples demonstrate how a reference can be established. All examples are piped to jq, and certificate output is truncated, in order to enhance the readability of output.

      Create a Fully Secure Reference, Using Credentials

      To create a fully secure reference from localhost to 10.144.220.102 by means of the target cluster’s administrative credentials and root certificate, enter the following.

      curl -X POST -u Administrator:password \
http://localhost:8091/pools/default/remoteClusters \
-d name=TargetCluster \
-d hostname=10.144.220.102 \
-d username=targetAdministrator \
-d password=targetPassword \
-d secureType=full \
--data-urlencode "certificate=$(cat ./ca.pem)" | jq '.'

      The username and password specified are those of the target cluster. Note that the demandEncryption flag is not specified; however, the encryptionType flag is set to full. The --data-urlencode flag specifies the local path to the root certificate for the target cluster.

      Formatted, the output from a successful execution is as follows:

      {
  "certificate": "-----BEGIN CERTIFICATE-----\nMIIDJzCC
          .
          .
          .
  FHjm+ycdHyRyk5iAooXWXP5xnaBE9+Vig==\n-----END CERTIFICATE-----",
  "deleted": false,
  "demandEncryption": true,
  "encryptionType": "full",
  "hostname": "10.144.220.102:8091",
  "name": "TargetCluster",
  "secureType": "full",
  "uri": "/pools/default/remoteClusters/TargetCluster",
  "username": "targetAdministrator",
  "uuid": "1ed664057cbaad1e283fe0e6dfa86506",
  "validateURI": "/pools/default/remoteClusters/TargetCluster?just_validate=1"
}

      Create a Half-Secure Reference, Using Credentials

      To create a half-secure reference from localhost to 10.142.180.102 by means of the remote cluster’s administrative credentials and its root certificate, enter the following. (Note that 10.144.220.102 is assumed to be running a pre-5.5 version of Couchbase Server.)

      curl -X POST -u Administrator:password \
http://localhost:8091/pools/default/remoteClusters \
-d name=TargetCluster \
-d hostname=10.144.220.102 \
-d username=targetAdministrator -d password=targetPassword \
-d demandEncryption=1 \
-d secureType=half \
--data-urlencode "certificate=$(cat ./ca.pem)" | jq '.'

      The username and password specified are those of the remote cluster. Note that the demandEncryption flag is set to 1, while, the encryptionType flag specifies half. The --data-urlencode flag specifies the local path to the root certificate for the (pre-5.5) target cluster.

      If connection is successful, the following is returned:

      {
  "certificate": "-----BEGIN CERTIFICATE-----\nMIIDJzCCAg+gAwIBAgIUSaVkKhAwNl8aTxDkfyoeUiStp1cw/
          .
          .
          .
  FHjm+ycdHyRyk5iAooXWXP5xnaBE9+Vig==\n-----END CERTIFICATE-----",
  "deleted": false,
  "demandEncryption": true,
  "encryptionType": "half",
  "hostname": "10.144.220.102:8091",
  "name": "TargetCluster",
  "secureType": "half",
  "uri": "/pools/default/remoteClusters/TargetCluster",
  "username": "targetAdministrator",
  "uuid": "1ed664057cbaad1e283fe0e6dfa86506",
  "validateURI": "/pools/default/remoteClusters/TargetCluster?just_validate=1"
}

      Create a Fully Secure Reference, Using Certificates

      To create a fully secure reference from localhost to target.en.cl, specifying that connection should occur with an external network, demanding full encryption, and authenticating by means of the remote cluster’s root certificate, a client certificate, and a client private key, enter the following:

      curl -X POST -u Administrator:password http://localhost:8091/pools/default/remoteClusters \
-d name=TargetCluster \
-d hostname=target.en.cl \
-d network_type=external \
-d demandEncryption=1 \
--data-urlencode "certificate=$(cat ./ca.pem)" \
--data-urlencode "clientCertificate=$(cat ./travel-sample.pem)" \
--data-urlencode "clientKey=$(cat ./travel-sample.key)"

      Note that the demandEncryption flag is set to 1, and a fully encrypted connection is thus enforced. The network_type=external parameter is specified, indicating that the target’s external network should be connected to, if it has been configured; otherwise, connection to an internal network is attempted.

      If successful, the command returns the following:

      {
  "certificate": "-----BEGIN CERTIFICATE-----\nMIIDJzCCAg+gAwIBAgIUSaVkKh
          .
          .
          .
  /FHjm+ycdHyRyk5iAooXWXP5xnaBE9+Vig==\n-----END CERTIFICATE-----",
  "clientCertificate": "-----BEGIN CERTIFICATE-----\nMIIDljCCAn6gAwIBAgI
          .
          .
          .
  cqHOcGj7RJE5SIwVZUPnSPeGHgLTTmijJhe15VFdA==\n-----END CERTIFICATE-----",
  "deleted": false,
  "demandEncryption": true,
  "encryptionType": "full",
  "hostname": "target.en.cl",
  "name": "TargetCluster",
  "secureType": "full",
  "uri": "/pools/default/remoteClusters/TargetCluster",
  "username": "",
  "uuid": "1ed664057cbaad1e283fe0e6dfa86506",
  "validateURI": "/pools/default/remoteClusters/TargetCluster?just_validate=1"
}

      The secureType field specifies full: therefore, the reference and its associated replications have now been fully secured. Both the target cluster’s root certificate and the source cluster’s client certificate are included in the output.

      See Also

      For information on using the REST API to create secure connections, see Secure a Replication. Additional information is provided in Certificates and XDCR Security and Networking.