Please use the form below to provide your feedback. Because your feedback is valuable to us, the information you submit in this form is recorded in our issue tracking system (JIRA), which is publicly available. You can track the status of your feedback using the ticket number displayed in the dialog once you submit the form.

Restrict Node-Addition

      +
      The REST API allows node-naming conventions to be configured such that only nodes whose names conform to those conventions can be added to the cluster.

      HTTP Method and URI

      POST /settings/security

GET /settings/security

POST /clusterInit

      Description

      When specified with the POST method, the /clusterInit URI (which is used to initialize a cluster, based on a single node), and the /settings/security URI (which is used in general configuration of cluster-security parameters) can be used to specify the naming conventions for allowed hosts. An allowed host is one that can be added or joined to the cluster, based on its conformance to the specified naming conventions.

      The GET /settings/security method and URI retrieve the current security settings for the cluster, including the current naming conventions established for allowed hosts.

      For a complete description of POST /clusterInit, see Initializing a Cluster. For a description of other parameters configurable by POST /settings/security, and retrievable by GET /settings/security, see Configure On-the-Wire Security.

      Full Admin or Local Security Admin permissions are required.

      This API is available only in Couchbase Server Version 7.1.1+.

      Curl Syntax

      curl -X POST http://<ip-address-or-domain-name>:8091/settings/security
  -u <username>:<password>
  -d allowedHosts=<array-of-naming-conventions>

curl -X GET http://<ip-address-or-domain-name>:8091/settings/security
    -u <administrator>:<password>

POST /clusterInit
    -u <administrator>:<password>
    -d allowedHosts=<list-of-naming-conventions>

      The array-of-naming-conventions argument to the optional allowedHosts parameter for POST /settings/security must be a JSON array, each of whose members is a string, surrounded by double-quotes, with each member separated from the next by a comma. Each string is a naming convention: hosts whose name matches at least one convention may be added or joined to the cluster. If the parameter and its argument are not specified, the default is a wildcard character ("*"), which indicates that any name is acceptable.

      Naming conventions can also be specified with the allowedHosts parameter for POST /clusterInit: however, these must be specified as a list of comma-separated strings, rather than as a JSON array.

      Permitted Naming Conventions

      The following list describes the permitted naming conventions.

      • Wildcard. A single wildcard, in isolation, indicates that any IP address or FQDN (Fully Qualified Domain Name) is acceptable. This is the default.

        For example, "*".

      • FQDN. A single wildcard is permitted within the FQDN. Matching rules are identical to those described in RFC6125. Note that matching is case-insensitive, and that no wildcard should be used within an A-label or U-label.

        For example, *.example.com matches with host.example.com.

      • IP address. This can be any IPv4 or IPv6 address. No wildcard is allowed.

        For example, 192.168.12.156, ::1, or fe80::aede:48ff:fe00:1122.

      • Subnet. This is expressed as a set of IP addresses, in CIDR (Classless Inter-Domain Routing) notation.

        For example, 192.168.0.0/16 or 2001:db8:85a3::/64.

      Matching and Adding Nodes

      If the name of the node to be added matches at least one of the listed conventions, the node can be added. After cluster-initialization, modification of the convention-list can be performed only by the Full Admin or the Local Security Admin for the cluster, and can only be performed on the localhost machine. Note that setting or modifying the list is permitted only if all current nodes can already be matched successfully with the new list.

      Responses

      Successful establishment of a list of naming conventions returns 200 OK and an empty array.

      Failure to authenticate returns 401 Unauthorized. An incorrectly expressed URI returns 404 Object Not Found.

      An attempt to establish a naming convention to which at least one existing node fails to conform returns 400 Bad Request, and a JSON object containing an message such as: {"errors":["allowedHosts - At least one cluster node (final.com.ubuntu) doesn’t match the allowed hosts"]}.

      Examples

      The following examples assume the existence of three, fully provisioned Couchbase-Server nodes, which have the IP addresses 10.144.231.101, 10.144.231.102, and 10.144.231.103. The node 10.144.231.101 has the following /etc/hosts file:

      127.0.0.1	localhost
127.0.0.1	com.test.ubuntu

10.144.231.102	dev.test.ubuntu
10.144.231.103	com.prod.ubuntu

      Thus, 10.144.231.101 recognizes itself by the FQDN com.test.ubuntu; and recognizes the other two machines as dev.test.ubuntu and com.prod.ubuntu respectively.

      The node 10.144.231.102 has the following /etc/hosts file:

      127.0.0.1	localhost
127.0.0.1	dev.test.ubuntu

10.144.231.101	com.test.ubuntu

      It thus recognizes itself as dev.test.ubuntu, and recognizes 10.144.231.101 as com.test.ubuntu.

      The node 10.144.231.103 has the following /etc/hosts file:

      127.0.0.1	localhost
127.0.0.1	com.prod.ubuntu

10.144.231.101 	com.test.ubuntu

      It thus recognizes itself as com.prod.ubuntu, and recognizes 10.144.231.101 as com.test.ubuntu.

      Note that on each of these nodes, when Couchbase Server is initialized and provisioned, the node’s FQDN (such as com.test.ubuntu) must be specified as the node-name. This can be accomplished by means of the UI (see Configure Couchbase Server), the REST API (see Initializing a Cluster), or the CLI (see cluster-init).

      Retrieving the Current Setting

      Executed on the one-node cluster 10.144.231.101, the following command retrieves the cluster’s current security settings. Here, the output is piped to the jq command, to improve readability.

      curl -X GET http://localhost:8091/settings/security -u Administrator:password | jq '.'

      The relevant part of the output is as follows:

            .
      .
  "allowedHosts": [
    "*"
  ],
      .
      .

      This shows that the default setting, the wildcard, is currently enforced. This means that any name allows a node potentially to be added to the cluster.

      Changing the Setting, Specifying an FQDN

      Executed on 10.144.231.101, the following command changes the cluster’s setting:

      curl -X POST http://com.test.ubuntu:8091/settings/security \
-d 'allowedHosts=["*.test.ubuntu", "127.0.0.1"]' \
-u Administrator:password

      This specifies that only nodes whose name matches either *.test.ubuntu or 127.0.0.1 can be added to the cluster. Thus, when the GET is run again, the relevant part of the output is as follows:

          .
    .
"allowedHosts": [
    "*.test.ubuntu",
    "127.0.0.1"
  ],
    .
    .

      This indicates that the convention has been successfully reconfigured.

      Adding a Conformantly Named Node

      Following this reconfiguration, the following statement adds 10.144.231.102 to the cluster:

      curl -v POST -u Administrator:password http://com.test.ubuntu:8091/controller/addNode \
-d 'hostname=dev.test.ubuntu' \
-d 'user=Administrator' \
-d 'password=password' \
-d 'services=kv'

      Addition succeeds, because the name of the new node, dev.test.ubuntu, matches the convention *.test.ubuntu. The following confirmation is provided:

      {"otpNode":"ns_1@dev.test.ubuntu"}

      Attempting to Add a Non-Conformantly Named Node

      Next, the node 10.144.231.103 is attemptedly added to the cluster:

      curl -v POST http://com.test.ubuntu:8091/controller/addNode \
-u Administrator:password \
-d 'hostname=com.prod.ubuntu' \
-d 'user=Administrator' \
-d 'password=password' \
-d 'services=kv'

      The operation predictably fails, with the following message:

      Error is : ["Host com.prod.ubuntu is not allowed to join. Check allowedHosts setting."]

      The failure has occurred because the name of the node, com.prod.ubuntu, does not match the convention *.test.ubuntu.

      Changing the Setting, Specifying a Subnet

      The established convention can now be changed, on 10.144.231.101, to permit the addition of 10.144.231.103. The following operation specifies a subnet, within the range of which IP addresses must fall for addition to succeed:

      curl -X POST http://com.test.ubuntu:8091/settings/security \
-d 'allowedHosts=["10.144.231.101/9", "127.0.0.1"]' \
-u Administrator:password

      The new convention can again be validated by means of the GET operation, which now returns the following:

      "allowedHosts": [
    "10.144.231.101/9",
    "127.0.0.1"
  ],

      This indicates that a node can now be added if its IP address falls within the specified range. Accordingly, the addition of 101.44.231.103 can be re-attempted:

      curl -v POST http://com.test.ubuntu:8091/controller/addNode \
-u Administrator:password \
-d 'hostname=com.prod.ubuntu' \
-d 'user=Administrator' \
-d 'password=password' \
-d 'services=kv'

      Note that in this statement, the node to be added did not need to be referred to by its IP address. However, since its IP address falls within the specified range, addition is successful; and is confirmed by the following response:

      {"otpNode":"ns_1@com.prod.ubuntu"}

      Following node-addition, rebalance should be performed, so that the added nodes fully become part of the cluster.

      Joining a Cluster

      The examples on this page all feature the adding of a node to a cluster. A node can also be joined to a cluster. Note that joining and adding are identically affected by the cluster’s established naming convention: therefore, if the node to be joined is not conformantly named, the operation fails with the message: Host <name> is not allowed to join. Check allowedHosts setting.

      See Also

      A general overview of nodes, including adding and joining, is provided in Nodes. An overview of managing on-the-wire security is provided in On-the-Wire Security. For more examples of adding nodes and rebalancing, see Add a Node and Rebalance. For examples of joinging nodes and rebalancing, see Join a Cluster and Rebalance.

      For a complete description of POST /clusterInit, see Initializing a Cluster.